MiscellaneousLike The Image Above? Click Here To Copy And Embed It On Your Website Or Blog:

Tips On Plumbing The Laundry Room Of Your Home

April 26, 2010 by

The laundry room of the home always remains in the line of a major plumbing irregularity. Since the laundry room utilizes active lines of plumbing setup on a regular basis, it is always susceptible to a plumbing fault. The homeowners can reduce the possibility of plumbing leaks and seepages in laundry room by following the basics while plumbing the laundry room.

The washing segment of the laundry room uses plenty of water for washing purposes. Hence, the washer section must be complemented by a properly managed draining system. The availability of an efficient drainage segment would prevent the accumulation of water in the washer section and consequently, possibility of leaks and seepages would be reduced. Consider only the PVC pipes or copper pipes of a standard width of about 2-3 inches. To eliminate the hidden clogs with ease, make way for a p-trap or s-trap.

The plumbing components of the laundry room must adhere to the plumbing guidelines set by the experts of the trade. For instance, the diameter of the washer segment must be about inches. Similarly, the draw-cocks of diameter inches should be included in the regular scheme of things. Besides that, incorporate a check-valve in the plumbing architecture of your laundry room as well.

Two attributes of the water supply lines must always be checked by the homeowners from time to time. These two attributes are temperature of the water inside the pipes and the pressure of the plumbing system. Maintain a temperature of 35 degrees or above for cold water line. On the other hand, keep the temperature of the hot water line in between 120 to 140 degrees Fahrenheit.

Besides the temperature of the constituting fixtures of the laundry room, the pressure of the water lines must be kept under the safe limits as well. A pressure of about 20-120 PSI is considered appropriate for washing machine using the plumbing segment of the laundry room. In addition, a separate water tank (6-8 gallons) must be installed in association with the plumbing schema.

Render a defined slope to the floor area of the laundry room such that water drains down into the floor drain segment.

Like This Post? Click Here To Copy And Publish It On Your Website Or Blog:

The floor-drain segment must be installed in the middle of the floor spread so as to collect all the water.

Take the guidance of a plumber if you face any complication in the concerned job.

Scott Rodgers is a distinguished author who has been authoring on plumbing contents for a long time now. His exemplary guidance has given motivation to a host of workers, ranging from Monmouth Junction Plumbers to Monroe Township Plumbers.

Related Videos:

Loading...

Rate this article:
VN:F [1.9.13_1145]
Rating: 0.0/5 (0 votes cast)

You Might Be Interested In:

Didn't find what you are looking for?


Suggested Terms:



    What do you think about this write-up?

    Tell us:

    *